When turned on, be sure oil is flowing from the Die Head before starting to cut threads. Operation Now that the proper die set is installed, you are ready to insert the pipe, secure it, adjust Die Head roller to correct pipe size, and begin cutting threads. Insert pipe into Rear Chuck, passing it through the Hammer Chuck about 4 inches. Heat Seal manufactures a full line of packaging and process equipment for the food service and industrial packaging industries. Heat Seal's commitment to quality and innovation has allowed the company to continue to be the leader within the markets they serve.
The Iijima 'M' Series press is an excellent value and has been the number one selling High Speed Hot Foil Stamping machine for over the past four years. In the heart of every Iijima press lies a reverence for craftsmanship. Each technician at Iijima has honed his craft for years before being invited to join the elite team of master technicians who assemble every Iijima press. Each press is hand assembled and inspected at our factory in Koga, Japan and manufactured to your specifications.
Since our founding 75 years ago, the Iijima family has relentlessly pursued the pinnacle of detail and quality so intense that the end product surpasses all others. By developing new technologies and products, Iijima will raise customer satisfaction to a realm of customer kândo. Iijima is committed to being the leader in foil stamping and die cutting technology throughout the world.
Iijima HSS-I High Speed Feeder
- Quad Suction Pick Up Suckers
- Adjustable Air Flow System with Front and Side Blowers
- Laser Double Sheet Detector
Foil Advance System
- Servo On/Off Automatic Impression System
- Digital Direct Drive Foil System with Bell Curve Technology
- Two Draw Servo Foil Advance System
- Servo On/Off Automatic Impression System
- Jet to Jet Air Blast System
- Convertible- Foil Cassette Removal System
- Touch Screen Controlled Digital Intelligence System for Monitoring Stamping Pressure
Iijima Feed Table
- Stainless Steel Feeder Table
- Two Push/ Pull Side Guides (O.S. & O.O.S)
- Digital Register Indicator with Infra-Red Reader
Foil Brush Removal System
- Four (4) brushes carrying out waste leaf from the delivery frame
Ampak Die Cutter Manual Parts
Optional Equipment
- Feeder Auto Pile Position System
- Feeder Auto Jogging System
- Feeder Belt Slow Down
- Feeder Pre Pile System
- Intermittent Feeding Apparatus
- Lower Platen Heating System (For Thermal Cutting & Creasing)
- Plastic Application System
- Hologram System
- Foil Break Detection System
- Tape Inserter
- Air Control System for Thin Materials
- Honey Comb Chases
- Die Cutting Chases
- Chase Changer
- Additional Touch Screen Panel at Delivery
Iijima MJ 1040-ES Standard Features
- 8000 IPH
- 330 Tons of Pressure
- Touch Screen Control
- New Iijima High Speed Feeding System (HSS-I)
- Feeder Color Scanner
- Laser Double Sheet Detector
- Bi-Directional Foil Pull (Foil Travel with Sheet or Against Sheet feed direction)
- On/Off Automatic Impression System
- Over Tonnage Protection System
- Air Blast System
- 2-6 Draw Foil Cassettes available
- Direct Drive Servo
- Telescopic Foil Roll Change System
- 12 Zone Digitally Controlled Heating System (With Guardian System)
- Honey Comb Chase
- Embossing Package with quick make-ready plates
- Die Cutting Chase
- Complete Stripping Equipment
- Foil Brush Removal System
- 300 mm Elevation Package
- One Touch Non-Stop Delivery System
- Job Change Over in less then 30 minutes
- Extremely Accurate Registration
- Shorter Make Ready Time
Downloads:
DGM Iijima Videos
Other Sizes Offered by Iijima Include:
Iijima 660
Available for High Speed Foil Stamping, Embossing, Die Cutting, Stripping and Blanking
Iijima 820
Available for High Speed Embossing, Die Cutting and Stripping
Iijima 1040
Available for High Speed Foil Stamping, Embossing, Die Cutting, Stripping and Blanking
Iijima 1300
Available for High Speed Foil Stamping, Embossing, Die Cutting, Stripping and Blanking
.
New Iijima MJ 820
- Introduction of the New Iijima MJ 820 High Speed
- Die Cutting Press
Friends for a long time, Mr. Hayashi and Walter Sussuma
- Friends for a long time, Mr. Hayashi and Walter Sussuma
- Iijima-MJ-820
Michael DeBard and Mr. Iijima
- Michael DeBard and Mr. Iijima
- Iijima MJ-820
Iijima-MJ-820-High-Speed-Die-Cutting-Press
- MJ-820-High-Speed-Die-Cutting-Press
Iijima Factory
- Working on the new press
New Iijima MJ 820
- New Iijima MJ 820 High Speed
- Die Cutting Press
Iijima MJ 820
- Iijima MJ 820 High Speed Die Cutting Press
Iijima MJ 820 High Speed Die Cutting Press
- Iijima-MJ-820
Iijima Factory
- Mr. Iijima and Michael DeBard at the Iijima Factory Japan April 2018
New Iijima MJ-Foil Press
- MJ-Foil Press
- Mr Iijima and Michael Debard at the Iijima factory Koga, Japan October 2018
Iijima MJ-Foil
- Michael DeBard and Kondo San at the Iijima Factory in Koga, Japan
- Iijima MJ Hot Foil Stamping, Die Cutting and Embossing Press
Iijima MJ-Foil Press
- < />< li=' />
- Iijima-MJ-Foil, Crankshaft instalation < />
IGAS July 2018 Tokyo, Japan
- Michael DeBard, Mr. Zwiener, Walter Sussuma and Paul Torres at the Iijima Factory Japan
- July 2019 Tokyo, Japan
Unmet
Sold by: WireBidsAmpak Die Cutter Manual Pdf
WireBids ID #WB33700Lot starts:
Current price{{ current_price | price }}({{ lot.bid_count }} {{ lot.bid_count | pluralize('bid') }})
{{ ( lot.buyers_premium > 0 ) ? lot.buyers_premium.toFixed(2)+'%' : '10%' }}
Amount
0' v-bind:class='status'>
Sold {{ lot.starting_price.toLocaleString('en-US') | price }}
{{ ( lot.buyers_premium > 0 ) ? lot.buyers_premium.toFixed(2)+'%': '10%' }}
0' v-bind:class='status'>
You've been outbid! Another bidder has placed a higher maximum bid. YOUR MAX BID: {{ bids[0].max_bid | format_number | price }}
You're winning! Max Bid: {{ bids[0].max_bid | format_number | price }}
You've won! Sale price: {{ current_price | price }}
See auction information and termsauction information and terms for full details. By purchasing this Lot, you acknowledge that you have read and agreed to the WireBids Terms and Conditions and this auctions Seller Terms.Seller Terms.
Ampak Die Cutter Manual Tile Cutter
Payment due : Within 7 days of auction end
Payment
Description
In working condition. With just minor service oil grease and inspections is is ready to go.Ampak Die Cutter Manual Instructions
Has manuals.220 Volts
30' wide by 30' Deep cutting area by 4' max depth
Click here for product specifications and brochure
Can wheel onto a dock high truck with clark lift pallet truck.
Loading dock on site.
Can wheel onto a dock high truck with clark lift pallet truck.
Loading dock on site.
For more information on this item - contact WireBids at 1-888-229-5733 or at sarah@wirebids.com
Accepts Cash
Seller's Terms
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. 'Seller' means each individual seller, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when it closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care. Do not bid on reserve items unless you intend to pay that amount. Seller may sell equipment for the closing price.
3. Buyer's Premium. You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller by the time and date specified above.
5. Payment Type. The seller accepts only the forms of payment specified in each lot.
6. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
7. Removal dates. Lots will be available for pickup on dates indicated by each seller. - All lots must be removed in a timely manner, no longer than a week after payment deadline unless otherwise specified by the seller.
8. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for loading, securing or unloading lots once they are made accessible to the buyer at Seller's facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
9. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
10. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
11. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser's sole and exclusive liability shall be the return of any monies paid on such lot. 12. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
13. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
14. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
15. Some lots are subject to a seller's reserve. If a lot is subject to a reserve, it will be indicated in the lot description and/or directly below the current bid of the lot.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when it closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care. Do not bid on reserve items unless you intend to pay that amount. Seller may sell equipment for the closing price.
3. Buyer's Premium. You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller by the time and date specified above.
5. Payment Type. The seller accepts only the forms of payment specified in each lot.
6. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
7. Removal dates. Lots will be available for pickup on dates indicated by each seller. - All lots must be removed in a timely manner, no longer than a week after payment deadline unless otherwise specified by the seller.
8. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for loading, securing or unloading lots once they are made accessible to the buyer at Seller's facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
9. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
10. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
11. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser's sole and exclusive liability shall be the return of any monies paid on such lot. 12. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
13. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
14. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
15. Some lots are subject to a seller's reserve. If a lot is subject to a reserve, it will be indicated in the lot description and/or directly below the current bid of the lot.
Shipping Info
ALL PACKAGING AND SHIPPING COSTS ARE RESPONSIBILITY OF BUYER. Shipping information can be found in bold at the end of each lot. Please factor this cost when bidding. Please contact each individual seller to arrange shipping.
Video
0' v-cloak='>You may also be interested in...
